- ページ 14

プリンター Ricoh Aficio BP20NのPDF 管理者マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Aficio BP20N 45 ページ。 B/w printer
Ricoh Aficio BP20N にも：パンフレット＆スペック (2 ページ)

Windows 2000 (TCP/IP)

NOTE: Windows 2000 supports printing via TCP/IP as standard when TCP/IP is

installed on a Windows 2000 Workstation.

Use the Add Printer Wizard to add the printer to the network.

Select [Start], select [Settings], and then select [Printers].

Double-click on the [Add Printer] icon to display the Add Printer Wizard.

Select [Local printer], uncheck the box labelled [Automatically detect and install my

Plug and Play printer.]and then select [Next] to display the

ports.

Select [Create a new port] to display the Printer Ports

Select [Standard TCP/IP Port] and select [Next] to display the Add Standard TCP/IP Port

dialog

Enter the IP Address of the printer in the [Printer Name or IP Address] field (you can

optionally enter a friendly name for the printer port you are creating or use the default

name created). Then select [Next] to continue.

If the network printer settings are not automatically detected, click on the [Custom] button

to setup the network printer port settings.

It is recommended that you select [Raw] as the Print Protocol.

If you prefer to use LPR:

Select [LPR] as the Print Protocol.

Enter [lp] (in lower case) in the [Queue Name] field.

Uncheck the box labelled [LPR Byte Counting Enabled]

Check the box labelled [SNMP Status Enabled].

The [Community Name] should normally be set to "public" (unless you have configured

the device to have a custom SNMP community name) and the [SNMP Device Index]

should be set to 1.

Select [OK].

The Add Printer Wizard will then request that you select the driver to be used for this

printer.

Insert the CD ROM with the printer drivers into the workstation and select [Have Disk].

Page 2-6

box.

dialog

box listing available

dialog

box.

Administratior Guide