- ページ 18

プリンター Ricoh Pro 8100SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro 8100S 44 ページ。 Pro 8100s; pro 8110s; pro 8120s
Ricoh Pro 8100S にも：取扱説明書 (36 ページ), 仕様 (8 ページ), ユーザーマニュアル (28 ページ), 取扱説明書 (8 ページ)

ページを印刷する

2. Safety Information for This Machine

• Be sure to disconnect the plug from the wall outlet at least once a year and check for the

following:

• There are burn marks on the plug.

• The prongs on the plug are deformed.

• If any of the above conditions exist, do not use the plug and consult your dealer or service

representative. Use of the plug could result in fire or electric shock.

• Be sure to disconnect the power cord from the wall outlet at least once a year and check for the

following:

• The power cord's inner wires are exposed, broken, etc.

• The power cord's coating has a crack or dent.

• When bending the power cord, the power turns off and on.

• Part of the power cord becomes hot.

• The power cord is damaged.

• If any of the above conditions exist, do not use the power cord and consult your dealer or

service representative. Use of the power cord could result in fire or electric shock.

• When this machine's circuit breaker is set to "Off", do not switch it to "On". Doing so could result

in electric shock, fire, smoke, or tripping of the room's breakers.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs

create an unstable connection that can result in unsafe buildup of heat.

• If this machine is not going to be used for several days or longer at a time, disconnect its power

cord from the wall outlet.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.

Pulling the cord can damage the power cord. Use of damaged power cords could result in fire

or electric shock.

• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around

the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

• When performing maintenance on the machine, always disconnect the power cord from the

wall outlet.

• Power Source