- ページ 6
プリンター Ricoh Pro 907のPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro 907 23 ページ。 B/w laser printer highly reliable production printing
Ricoh Pro 907 にも: マニュアル (12 ページ), パンフレット&スペック (6 ページ)
Cleaning the Automatic Document Feeder [ADF]
If the exposure glass or ADF belt is dirty, copy clarity may be reduced. Clean these parts if they are dirty.
To clean the ADF, clean 1 and 2 as shown in this diagram with a soft damp cloth. Do not use wet rags or spray any liquids in the
feeder. Keep loose objects away from feeder as these will cause damage and machine failure.
Important
Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances get inside the machine or melt
plastic parts, machine failure will occur.
Do not clean parts other than those explicitly specified in the copier manual. Other parts should ONLY be cleaned by your service
representative.
Always use caution and care when cleaning, handling or using the document feeder.
Originals Not Suitable for the Document Feeder
•Stapled, clipped, perforated, or torn originals
•Curled, folded, or creased originals
•Pasted or sticky originals, such as translucent paper
•Coated originals, such as thermal fax paper, foil, art paper, or carbon paper
•Originals with indexes, tags, perforated lines, or other projecting parts
•OHP transparencies
•Thick originals, such as postcards, and flimsy originals of low stiffness
Contact your Service Representative
for issues regarding the document
feeder if you are unsure what to do
to avoid damage or injury.