- ページ 13

IP電話 Cisco Unified 7900 SeriesのPDF リリースノートをオンラインで閲覧またはダウンロードできます。Cisco Unified 7900 Series 20 ページ。 Release notes for firmware release 9.3(1)sr2
Cisco Unified 7900 Series にも：システムマニュアル (50 ページ), 解決マニュアル (10 ページ), システムマニュアル (36 ページ), ユーザーマニュアル (11 ページ)

ページを印刷する

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2

•

For Cisco Unified Communications Manager 4.3 and earlier:

cmterm-7914-sccp.5-0-4.exe

• For Cisco Unified Communications Manager 5.0(1), 5.0(2), and 5.0(3):

cmterm-7914-sccp.5-0-4.cop

• For Cisco Unified Communications Manager 5.0(4) and later:

cmterm-7914-sccp.5-0-4.cop.sgn

Step 9

If you added the firmware file to the cart, click the Download Cart link when you are ready to download the

file.

Step 10 Click the + next to the firmware file name in the Download Cart section to access additional information about

this file. The hyperlink for the readme file is in the Additional Information section, which contains installation

instructions for the corresponding firmware:

cmterm-7914-sccp.5-0-4.readme.html

Cisco Unified IP Phone Expansion Modules 7915 and 7916 installation

This section describes how to install Cisco Unified IP Phone Expansion Modules 7915 and 7916.

Cisco Unified IP Phone Expansion Modules 7915 and 7916 firmware issues

Before you use the Cisco Unified IP Phone Expansion Module 7916, you must load the expansion module

with firmware release B016-1-0-4-2 before using the phone to support relevant features on your expansion

module.

Before you use the Cisco Unified IP Phone Expansion Module 7915, you must load the expansion module

with firmware release B015-1-0-4-2 before using the phone to support relevant features on your expansion

module.

The Cisco Unified IP Phones 7962G, 7965G, and 7975G support the Cisco Unified IP Phone Expansion

Modules 7915 and 7916. You can add a maximum of two expansion modules to these phones.

Install Cisco Unified IP Phone Expansion Modules 7915 and 7916 firmware

To download and install the firmware, perform these steps:

Cisco Unified IP Phone Expansion Module firmware installation

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2