- ページ 19

プリンター Ricoh Pro C7100sのPDF 最初に読むマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Pro C7100s 40 ページ。
Ricoh Pro C7100s にも：スターターマニュアル (40 ページ)

• Contact your service representative if you need to lift the machine (such as when relocating it to

another floor). Do not attempt to lift the machine without the assistance of your service

representative. The machine will be damaged if it topples or is dropped, resulting in malfunction

and risk of injury to users.

• Do not look into the lamp. It can damage your eyes.

• Do not hold the control panel while moving the machine. Doing so may damage the control

panel, cause a malfunction, or result in injury.

• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing

so result in an injury if your hands or fingers are pinched.

Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside

this machine are high voltage components that are an electric shock hazard and laser

components that could cause blindness. Contact your sales or service representative if any of the

machine's internal components require maintenance, adjustment, or repair.

• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.

Note again that exposure to the laser components inside this machine risks blindness.

• Some of this machine's internal components get very hot. For this reason, take care when

removing misfed paper. Not doing so could result in burns.

• When removing jammed paper, make sure not to trap or injure your fingers.

• When loading paper, take care not to trap or injure your fingers.

• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or

pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.

• While safety measures have been installed to prevent accidents, you must not touch the

machine's rollers while it is operating. Doing so could cause injury.

Safety Information