- ページ 10

プリンター Ricoh Ri 1000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Ri 1000 22 ページ。 Procedure for long-term storage
Ricoh Ri 1000 にも：トラブルシューティングマニュアル (27 ページ), ユーザーマニュアル (9 ページ), ユーザー・メンテナンス・マニュアル (7 ページ)

rests against the corner of the carriage.

The pawl on the side of the carriage that is not visible because it is in the shadow of

the carriage should be handled with the head protection cover parallel to the guide rod

and carriage, so that when the two pawls on the right side of the head protection

cover are aligned with the mounting position, they are simultaneously aligned with the

mounting position. the two pawls on the right side of the head protection cover can be

aligned to the mounting position at the same time

4.Take the filled cleaning liquid with the head protection cover under the

carriage to prevent spillage

If cleaning solution spills when the head protection cover is pushed up, wipe it off.

After attaching the head protection cover, observe it from the front and check if the

head protection cover is not tilted.

If it is tilted, a gap may be visible between the carriage and the cap inside the head

protection cover, as shown in the NG image below. In this case, perform the

Procedure for long-term storage

10 / 22

RICOH Ri 1000