- ページ 2

IP電話 Cisco Unified 8961のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Unified 8961 4 ページ。 Cisco systems telephone
Cisco Unified 8961 にも：リリースノート (16 ページ), 概要 (30 ページ), 管理マニュアル (8 ページ), ユーザーマニュアル (48 ページ), ユーザーマニュアル (10 ページ), 特徴 (35 ページ), クイックスタート (2 ページ), ユーザーマニュアル (22 ページ), セットアップ (4 ページ), クイック・スタート・マニュアル (2 ページ), クイック・リファレンス・マニュアル (3 ページ), マニュアル (12 ページ), クイック・リファレンス (4 ページ), クイックグランス (3 ページ), クイックマニュアル (10 ページ), クイック・スタート・マニュアル (2 ページ), (ポルトガル語）クイック・スタート・マニュアル (2 ページ)

Attaching the Cisco Unified Video Camera

On the same window, enable the Video Capabilities parameter.

Step 2

Click Save.

Step 3

Attaching the Cisco Unified Video Camera

To install the Cisco Unified Video Camera, you can either:

•

The USB port connector on the bottom of the Cisco Unified Video Camera attaches to the back port (not

the side port) on the Cisco Unified IP Phone 9951 or 9971. As you attach the USB connector to the back

port on the phone, the camera should slide easily into the camera pin holes on the phone.

Figure 3-4 on page 3-15

Unified IP Phone 9951.

pin holes for the Cisco Unified IP Phone 9971.

Installation Procedure

For the complete installation procedure, see the Cisco Unified Video Camera Quick Start Guide at this

location:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/8_0/english/user/qsg/qs99

camen80.pdf

Once you have attached the camera on your phone, you can control the features of the camera.

This section provides information on the features you can control from the phone:

•

The View Area feature acts as a wide angle and zoom function for your camera and allows you to adjust

the view area that is shared during video streaming. The View Area feature acts as a wide angle and zoom

function for your camera.

To adjust the camera view area, follow these steps:

Procedure

On the Cisco Unified IP Phone, press the Applications button

Step 1

Select Accessories.

Step 2

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.0 (SIP)

5-2

Attach the camera to your phone.

Attach the camera to your computer monitor (or to another object in your work area).

shows the location of the back USB port and the camera pin holes for the Cisco

Figure 3-6 on page 3-17

Adjusting the Camera View Area, page 5-2

Adjusting the Brightness Setting, page 5-3

Adjusting Auto Transmit Setting, page 5-3

Chapter 5

Setting Up the Cisco Unified Video Camera

shows the location of the back USB port and the camera

OL-20862-01