- ページ 13
プリンター Ricoh SP C242 SeriesのPDF ファームウェア・アップデート・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh SP C242 Series 14 ページ。
ページを印刷する
Control Panel Display Messages (SP C240SF/C242SF/C240DN/C242DN)
The following table lists the control panel display messages that can appear if
an error occurred during a firmware update, and explains the likely causes of
those messages and what action to take when they appear.
Message
Initializing
Control Panel Indicator Patterns (SP C240DN/C242DN)
The indicators of the control panel show the machine's status during and after
firmware updates. If an update fails or does not complete normally, refer to the
following table to resolve the problem.
Indicator pattern
The Alert and Data
in indicators light up
simultaneously.
Likely cause
If this message remains on the
control panel display for more
than one minute following
a firmware update, a power
failure or similar interruption
prevented the update from
completing.
Likely cause
If the Alert and Data in indica-
tors light up simultaneously
after you turn the machine's
power back on following a firm-
ware update, the update did not
complete due to a power failure
or similar interruption.
Solution
See p.7 "If initialization does not
end following a firmware update"
and use the procedure shown
there to recover from the failure
and complete the update.
If the recovery fails and the indi-
cators continue to flash alternate-
ly, contact your sales or service
representative.
Solution
See p.7 "If initialization does
not end following a firmware
update" and use the procedure
shown there to recover from the
failure and complete the update.
If the recovery fails and the
indicators continue to flash
alternately, contact your sales or
service representative.
13