ページを印刷する
(2) Reset mode
PROPER CARE OF YOUR CAMERA
* If there is dirt on the lens and in the camera body, do not attempt to remove it with your fingers. Use a blower to
blow the dust away, or wipe the surface gently with camera lens tissue or a soft cloth. (Fig. 38)
* Camera malfunction can be caused by impact, humidity, salt etc. After using the camera at the beach or places
where there is salt spray, high humidity or chemicals, wipe it off carefully. (Fig. 39)
* Take care not to expose the camera to sudden changes in temperature, as that may cause condensation on the lens
and film or inside the body, or other malfunctions. (Fig. 40)
* Do not expose the camera for a long period of time to extremely high temperatures, such as in your car or on the
beach, as this may ruin your film, or cause other malfunctions. (Fig. 41 )
* When using a tripod, do not try to force a long screw into the socket. The screw length should be less than 5.7
mm (1/4 inch). (Fig. 42)
* Do not place the camera near equipment that has strong magnetic fields such as a television or radio. (Fig. 43)
MAJOR SPECIFICATIONS
Type: Fully automatic 35 mm autofocus lens shutter camera with built-in zoom lens
Lens: 35 mm f5.0-70 mm f9.5 zoom lens 6 elements 5 groups
Focusing: Active type auto focus 1.2 m (4 fl.)-inf.
Shutter: Programmed Electronic shutter: 1/5-1/250 sec.
Selftimer: Electronic type with LED indicator. Operating delay approx. 10 sec. 7 see LED lights and 3 see LED
blinks
Viewfinder: Real image zoom viewfinder Mag. x 0.33-0.58, Field of view about 83%
Exposure Adjustment: Programmed AE with CdS cell Coupling range EV8.0-15.0 (ISO 100)
Film Speed: ISO 100, 400. Compatible with DX code system.
Flim Load/Wind/Rewinding: Ricoh auto-load system. Automatic 1st frame set. Automatic film rewind at the end
of film. Mid-roll rewind is possible.