ページを印刷する
SUBJECT: Troubleshooting for the bent image and/or skewed images.
PREPARED BY: S. Orita
CHECKED BY:
CLASSIFICATION:
Action Required
Troubleshooting
Retrofit Information
The bent image and/or skewed images appear on copies as follows:
Phenomenon:
1) Bent image
2) Paper skewing
In addition, when paper skewing appears as described above, lines also
may be bent at around 50 mm from the trailing edge of the copy paper.
Technical Bulletin
Revision of service manual
Information only
Other
The bent image appears at around 50 mm from the trailing edge of
copy paper as shown.
Paper feed
direction
Front
The rear side of the copy paper feeds ahead of the front side, and
skewed images appear on copies as shown.
Paper feed
direction
Front
FROM: Copier Technical Support Section
MODEL:
E7 series
around 50 mm
Rear
Copy paper
Copy image
Vertical lines on the copy im-
age are not parallel to the
edge of the copy paper.
Rear
Reissued on Dec. 15 '92
No. RTB-007
DATE: Oct. 15 '92
PAGE: 1 of 10
(A076/A077 copier)