ページを印刷する
SUBJECT: Remarks for replacing the fusing thermoswitch
6. Remove the fusing cover [A] (1 screw).
7. Remove the thermoswitch bracket [B] (1 screw).
8. disconnect two thermoswitch connectors [C].
9. Remove the thermoswitch [D] from the bracket (2 screws).
NOTE:
When installing the thermoswitch bracket [E], make sure that the projection [F] on the
thermoswitch bracket enters into the hole [G] on the fusing unit frame [H].
[F]
[E]
Technical Bulletin
[G]
This is newly added
[H]
No. RTB-013
DATE:
January. 31, 1994
PAGE: 2 of 2