- ページ 29

コピー機 Ricoh Aficio MP C5502のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ricoh Aficio MP C5502 41 ページ。 Multifunction color
Ricoh Aficio MP C5502 にも：クイック・スタート・マニュアル (45 ページ), 仕様 (8 ページ), クイック・スタート・マニュアル (24 ページ)

PaperCut – Ricoh Embedded Manual

product ID. See the screenshot below showing the application information for the

PaperCut embedded application. The product id is a 9 digit number and is

highlighted below.



Take note of the application product id.

To configure the application switch buttons:



On the "Devices" tab, select the Ricoh device to configure



Select the "Advanced Config" tab.



Locate the entry "ext-device.ricoh.app-button1.label". This is the text that appears

on the application button.



Change the button label to as appropriate, and press the "Update" button next to the

setting.



Locate the entry "ext-device.ricoh.app-button1.product-id". This will be set to

"DISABLED" to indicate the button is disabled.



Enter the product id of the application and press the "Update" button.



Confirm that the settings were saved. The settings will take effect after a short

period of time.

To create a second application switch button perform the same steps setting the "ext-

device.ricoh.app-button2.label" and "ext-device.ricoh.app-button2.product-id" settings.

To disable the application buttons set the product id settings to "DISABLED".

5.4 Configuring Swipe Card Readers

For a list of supported card readers please see Appendix A towards the end of this

document.

Swipe cards contain numbers which are used to identify users according to the card number

configured in the User Details screen under "Card/Identity" number. Some readers report

information in addition to the number encoded on the card, such as checksums. PaperCut

can treat these cases in two ways:

Revision: 19

2012-10-26

29 of 41