- ページ 7

コントローラー ActronAir LM-ZC-2GのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。ActronAir LM-ZC-2G 12 ページ。

Operation Manual

Turning Off

1. Press the

Button to turn off the zone. Alternatively, press the designated zone button on the Master Wall

Controller. When the designated zone LED in the Master Wall Controller turns Off, the zone is Off.

NOTES

• In Zone Control ESP Auto mode, the controller will adjust the position of zone damper automatically in order to meet

the desired temperature.

• Heating mode will be displayed when the zone starts to heat the room.

• Cooling mode will be displayed when the zone starts to cool the room.

09. Zone Damper Blade Indicator

Display

NOTE

When in ESP Auto, damper blade indicator will automatically adjust itself to regulate the correct amount of airflow (HEAT or

COOL) in order to maintain the desired setpoint temperature.

NOTES

• This mode is commonly used to circulate airflow without Cooling / Heating throughout your home.

• Quite often used on mild days to circulate fresh air through the home. Simply open a few windows and let the Fan Only

Mode circulate fresh air through your home.

1. Make sure the air conditioner is Off.

2. Press the

Button on the Master Wall Controller. The current fan speed setting will appear and the display

backlight will turn On (if it is off).

Fully Open Damper Blade

Allows full airflow through in order to meet your required conditions.

Partially Closed Damper Blade

Regulating airflow and temperature to meet set conditions.

Partially Open Damper Blade

Regulating airflow and temperature to meet set conditions.

No Damper Blade Indicator

• Room is satisfied with temperature.

• Zone is turned Off.

• Zone is waiting on Heat/ Cool mode change.

Wall Controller

Operation Manual LM-ZC-2 Wall Controller

Document No. 0525-082 Ver. 1 190918

Zone Controller

Status

Page 7