プリンターアクセサリー Ricoh 3800C SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh 3800C Series 2 ページ。 Paper feed unit, 500 x 1, for machine code: g060/g080/g082
Ricoh 3800C Series にも：インストレーション・マニュアル (4 ページ), メンテナンス・マニュアル (7 ページ), インストレーション・マニュアル (2 ページ)

ページを印刷する

PAPER FEED UNIT

Type 3800C (500 x 1)

For Machine Code: G060 / G080 / G082

INSTALLATION GUIDE

Important

Check the printer nameplate to confirm the model code.

If you want to use the optional duplex unit, 2 tray finisher and 4-bin mailbox at the same time, install the optional paper feed unit first, and then

install these options.

If you have already installed the optional duplex unit, 2 tray finisher and 4-bin mailbox, remove all these options before installing the optional paper

feed unit.

Before installation, check the orientation of the paper feed unit or 2000-sheet Large Capacity Tray you want to place.

When installing multiple options, install the paper feed unit first.

Four people are needed to install the paper feed unit. Start the installation work after all four people are ready.

The printer weighs approximately 85kg (187lbs).

The 500-sheet paper feed unit weighs approximately 18kg (39.7lbs).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Check the contents of the box for the following items:

Description

Paper Feed Unit

Installation Guide(This sheet)

Be sure to check the following points:

•The power is turned off.

•The power cord is unplugged from the wall outlet.

•The interface cable is unplugged from the printer.

Remove the adhesive tape.

Adjust the four corners of the printer to those of the 500-

sheet paper feed unit, and then lower the printer slowly

into place.

Caution

• Before installing options, the machine should be turned off and unplugged for at least thirty minutes.

Components inside the machine become very hot, and could result in a burn if touched.

• When lifting the machine, use the grips on both sides. The machine could break or cause injury if

dropped.

• It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric

shock.

• Before moving the machine, unplug the power cord from the outlet. If the cord is unplugged

(Code: G567)

abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire

hazard.

• When moving the machine, each person should hold a handle, located on two sides of the printer,

and then lift slowly. Lifting carelessly or dropping it may cause injury.

• When moving the paper feed unit, hold the bottom of both sides, and then lift slowly. Lifting

carelessly or dropping it may cause injury.

Q'ty

ZDJP004J

ZDJP006J

Important

Four people should hold the handles, located on two sides of

the printer, to move it.

Open the tray of the 500-sheet paper feed unit.

Remove the adhesive tape and sheet of paper.

Remove the adhesive tape and the corrugated paper

inside the tray, as shown.

ZDJP007J

G567-8600B