- ページ 5

プリンターアクセサリー Ricoh B180のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Ricoh B180 8 ページ。 Scanner accessibility option

5. Remove the DF connector cable [A] (! x 2, " x1).

NOTE: Keep these screws. You will use these screws later.

6. Remove the connector bracket [B].

7. Disconnect the connector [C] of the IPU harness and release the clamp [D].

8. Remove the core [E] from the I/F cable.

NOTE: Keep this core. You will use this core later.

9. Disconnect the I/F cable [F] from the IPU (! x 2). Then put it inside the

machine.

10. Disconnect the harness [G] from the scanner unit to the SIO (" x 3, # x 1).

Then put this harness inside the scanner frame.

11. Connect the connector of the DF connector cable [H] to the SIO board.

12. Bind the IPU harness [I] and DF connector cable [H] with the clamp [J]. Keep

these in the machine.

13. Attach the connector bracket [K] to the SIO board to keep this bracket.

[A]

[B]

[E]

[G]

[H]

[F]

[D]

[C]

[F]

G570I303.WMF

[K]

[J]

[I]

G570I304.WMF