プリンターアクセサリー Ricoh G556のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh G556 1 ページ。 Envelope feeder

Envelope Feeder

Type 2600

For Machine Code: G056/G058/G073/G074/G091

Important

Do not slide more than one paper tray out at the same time. Having more than one paper tray filled with paper in a fully extended position could

cause the machine to fall down.

Check the printer nameplate to confirm the model code.

Check the contents of the box for the following items:

Description

Envelope Feeder

Installation Guide (This sheet)

Pull out the second paper tray (tray 2) of the

optional Paper Feed Unit until it stops. After that, lift

it slightly, and then pull it out.

Important

The Envelope Feeder must be used in the top-most optional

Paper Feed Unit (tray 2).

The tray of the top-most optional Paper Feed Unit is beneath

the paper tray.

Note

Keep the paper tray with paper in a cool dark place.

(Code: G556)

This unit is a tray that slides into the optional Paper Feed Unit.

Without the optional Paper Feed Unit, this Envelope Feeder cannot

be used.

Your printer can have two optional Paper Feed Units. However, the

Envelope Feeder must be used in the top-most optional Paper Feed

Unit (tray 2) . It cannot be used in the bottom-most optional Paper

Feed Unit (tray 3).

The tray of the top most optional Paper Feed Unit is beneath the

paper tray.

Q'ty

ZDDP330E

Printed in Japan

While lifting the front side of the Envelope Feeder, place

the feeder into the printer. Then slide it into the printer

until it stops.

Note

For information about loading paper, see "Loading Paper in

the Optional Paper Tray" in the Printer Reference is provided

as a PDF file on the CD-ROM labeled "Operating Instructions".

ZDDP340E

G556-8600B