ページを印刷する1.5 Network Setting
Projector Setting
Projector name which is displayed in this web page can be changed.
Enter a new projector name in the box and clock [Apply] button.
<Note>
This projector name is also used in PJLink control.
Up to 32 alphanumeric characters and symbols are accepted.
PJLink setting
Settings of PJLink password can be changed in this section.
-Change the password.
Confirm "Enable" is checked in PJLink password.
Enter the current password in current password box.
Enter a new password in both New Password box and Confirm Password box.
Click [Apply] button.
-Enable the password when disabled.
Check "Enable" in PJLink password.
Enter a new password in both New Password box and Confirm Password box.
Click [Apply] button.