- ページ 2

ファックス Ricoh 3800C SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Ricoh 3800C Series 2 ページ。 Paper feed unit, 500 x 1, for machine code: g060/g080/g082
Ricoh 3800C Series にも：インストレーション・マニュアル (4 ページ), メンテナンス・マニュアル (7 ページ), インストレーション・マニュアル (2 ページ)

Take out the packaged items, making sure there are two

thumb screws and one mounting bracket. Close the tray of

the 500-sheet paper feed unit firmly.

Slowly pull out Tray 2 while lifting up a little.

Fasten one thumb screw. A coin can be used to fasten the

screws.

Slowly slide Tray 2 back into the printer, until it stops.

Open the right cover of the 500-sheet paper feed unit.

ZDJP005J

ZHXH852J

ZDJP009J

ZHXH030N

Printed in Japan

Hook the mounting bracket to the hole, as shown.

Fasten the bracket with the other thumb screw. A coin can

be used to fasten the screws.

Close the right cover of the 500-sheet paper feed unit.

Stick label "3" above the handle on the front of the 500-

sheet paper feed unit.

Note

After finishing the installation, you can check the 500-sheet

paper feed unit is installed properly: Print the configuration

page from the "List/Test Print" menu. If it is installed properly,

you will see "Paper Feed Unit (Tray 3)" appear under the

"Options" list. (G060, G080)

After finishing all installation for printing, you can check whether

the 500-sheet Paper Feed Unit is installed properly. Print the

Configuration Page from the "Print Menu" menu. If it is installed

properly, you will see "Tray 3" under the "Paper Tray

Information" list. (G082)

If the paper feed unit is not installed properly, repeat the

procedure from step

. If you cannot install it properly even

after reinstallation, contact your sales or service representative.

ZHXH040N

ZDJP012J

ZDJP126J

G567-8600B