ネットワーク・ルーター Cisco 12000/10/16-BLWER=のPDF 交換取扱説明書をオンラインで閲覧またはダウンロードできます。Cisco 12000/10/16-BLWER= 18 ページ。 Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router

ページを印刷する

Cisco 12016, Cisco 12416, and Cisco 12816 Router

Blower Module and Air Filter

Replacement Instructions

Cisco Product Numbers: GSR16-BLOWER=, 12000/10/16-BLWER=, ACS-GSR16-FLTR=

This publication contains removal and replacement procedures for the blower module and chassis air

filter in Cisco 12016, Cisco 12416, and Cisco 12816 routers. Unless otherwise noted, all information in

this publication applies to all router models.

Note

The illustrations in this guide represent both the original and newer enhanced capacity blower modules,

and air filters for the Cisco 12016, Cisco 12416, and Cisco 12816 routers. Depending on your system,

these components may not look exactly like those in your chassis, but the removal and replacement

procedures are essentially the same. For clarity, most chassis covers are not shown in the illustrations.

Blower Module Compatibility

There are currently two types of blower modules in use for the Cisco 12016, Cisco 12416, and Cisco

12816 routers; blowers that shipped with original systems, and enhanced capacity blowers that ship with

current systems.

If you are replacing an:

•

You cannot mix original and enhanced capacity blower modules in the same chassis. Both the upper and

Caution

lower blower modules must be identical.

•

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Original blower module (GSR16-BLOWER=)—Use an original blower module or enhanced

capacity blower modules as replacements.

Enhanced capacity blower module (12000/10/16-BLWER=)—Use an enhanced capacity blower

module as a replacement.