- ページ 5
ネットワーク・ルーター Cisco 12006 seriesのPDF 交換取扱説明書をオンラインで閲覧またはダウンロードできます。Cisco 12006 series 44 ページ。 Chassis replacement instructions
Cisco 12006 series にも： 開梱取扱説明書 (16 ページ), データシート (9 ページ)
ページを印刷するTools and Equipment
You need the following items to replace a Cisco 12006 or Cisco 12406 Router chassis:
•
•
•
•
•
•
•
•
Safety Guidelines
Before you perform any procedure in this publication, review the safety guidelines in this section to
avoid injuring yourself or damaging the equipment. In addition, review the safety warnings listed in the
Regulatory Compliance and Safety Information for the Cisco 12000 Series Router publication
(Document Number 78-4347-xx) that accompanied your router before installing, configuring, or
maintaining the router.
The following guidelines are for your safety and to protect equipment. The guidelines do not include all
hazards. Be alert.
Safety with Equipment
•
•
•
•
•
•
Safety with Electricity
•
•
•
•
•
•
78-16109-01
ESD-preventive strap
3/16-inch and 1/4-inch flat-blade screwdrivers
Number 1 and Number 2 Phillips screwdrivers
9/16-inch (14-mm) wrench
3/4-inch (19-mm) socket and ratchet wrench
Vacuum cleaner
Antistatic bag or similar ESD-preventive container
Replacement chassis, Part Number: GSR6/120=
Always disconnect all power cords and interface cables before moving the system.
Never assume that power is disconnected from a circuit; always check.
Keep tools and assembly components away from walkways and equipment rack aisles.
Do not work alone if potentially hazardous conditions exist.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing safety grounds.
Before beginning any procedures requiring access to the interior of the router, locate the emergency
power-off switch for the room in which you are working.
Disconnect all power and external cables before installing or removing a router.
Never assume that power has been disconnected from a circuit; always check.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Never install equipment that appears damaged.
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing safety grounds.
Cisco 12006 and Cisco 12406 Router Chassis Replacement Instructions
5