- ページ 8

ネットワーク・ルーター Cisco 1700 seriesのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1700 series 46 ページ。 Secure firewall management center
Cisco 1700 series にも：規制遵守と安全情報マニュアル (45 ページ), マニュアル (15 ページ), 設定マニュアル (25 ページ), アプリケーションノート (41 ページ), ハードウェアのトラブルシューティング (12 ページ), 概要マニュアル (13 ページ), 設定 (34 ページ), マニュアル (5 ページ), クイック・スタート・マニュアル (6 ページ)

Package Contents

The following figure shows the package contents for the 1700, 2700, and 4700. Note that the contents are

subject to change and your exact contents might contain additional or fewer items.

Figure 2: Package Contents

The serial number (SN) for the 1700, 2700, and 4700 is printed on the pullout asset card located on the front

panel as shown in the following figure of the 1700.

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide

Use only SFPs have been qualified for use on the management center. Although non-Cisco

Note

SFPs and other Cisco SFPs are allowed, we do not recommend using them because they

have not been tested and validated by Cisco. Cisco TAC may refuse support for any

interoperability problems that result from using an untested SFP transceiver.

Chassis

Cisco rail kit (Cisco part number 800-43376-02)

Cisco Secure Management Center 1700, 2700,

and 4700

This document contains URLs that point to the

product overview, hardware installation guide,

regulatory compliance and safety information

guide, warranty, and licensing pages, and a QR

code that points to the management center

Documentation Portal.

RJ-45 to DP9-RS232 console cable (Cisco part

number 72-3383-XX)

RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six

feet long (Cisco part number 72-1482-XX)

Two 10-Gb SFP+ transceivers with cables

supported for all models or 25-Gb SFP+

transceivers with cables supported for the 4700

Optional for all models; in package if ordered.

Overview