- ページ 6

ネットワーク・ルーター Cisco 1802のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1802 18 ページ。 Integrated services routers cabling and installation
Cisco 1802 にも：データシート (16 ページ)

ページを印刷する

1. Connecting the Router

(Optional) The Cisco 1801, Cisco 1802, and Cisco 1803 routers support a 144-kbps dialup connection to your service

Step 5

provider network through their ISDN S/T port. These connections can serve as a backup to your service provider if your

primary connection goes down. To make a backup connection to your service provider network, connect one end of a

straight-through RJ-11 cable to the ISDN S/T port on the router, as shown in Figure 2, and connect the other end of

the cable to your telephone wall jack.

Note

To configure your router for a backup dialup connection, you must use the Cisco IOS command-line

interface (CLI). For more information, see the Cisco 1800 Series Integrated Services Routers (Fixed) Software

Configuration Guide.

Connecting Antennas to the Router RP-TNC Connectors

If your router has the wireless LAN option, connect the antennas by screwing the antenna connectors in a clockwise direction

onto the reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel of the router. Figure 3 shows an

example of how to connect the swivel-mount dipole antennas to the router.

The location and position of your router's antennas are crucial to effective wireless connectivity. For more information

Note

about the antennas compatible with the Cisco 1801, Cisco 1802, and Cisco 1803 routers, see the online documents

located at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800fix/antennas/index.htm

Figure 3

Connecting Antennas to the Router

For information about configuring the wireless LAN functionality of your router, see the Cisco Access Router Wireless

Configuration Guide at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1800fix/awg/index.htm