- ページ 13

ネットワーク・ルーター Cisco 2525のPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2525 23 ページ。 Troubleshooting guide
Cisco 2525 にも：設定マニュアル (23 ページ), 概要 (10 ページ), インストールの準備 (19 ページ), トラブルシューティングマニュアル (4 ページ)

AppleTalk ending cable range [3]: 4

AppleTalk zone name [myzone]: ZZ Serial

AppleTalk additional zone name:

Configure IPX on this interface? [no]: yes

IPX network number [2]: B002

Configure the second synchronous serial interface, for example, as follows:

Step 3

Configuring interface Serial1:

Is this interface in use? [yes]:

Configure IP on this interface? [yes]:

Configure IP unnumbered on this interface? [no]:

IP address for this interface: 172.16.74.2

Number of bits in subnet field [8]:

Class B network is 172.16.0.0, 8 subnet bits; mask is

255.255.255.0

Configure AppleTalk on this interface? [no]: yes

AppleTalk starting cable range [3]: 5

AppleTalk ending cable range [4]: 5

AppleTalk zone name [myzone]: ZZ Serial

AppleTalk additional zone name:

Configure IPX on this interface? [no]: yes

IPX network number [3]: B003

The configuration you enter is now displayed and you are asked if you want to use

Step 4

the displayed configuration. If you enter no, you will lose the configuration

information you just entered and you can begin the configuration again. If you

enter yes, the configuration will be entered and saved in the startup configuration:

Use this configuration? [yes/no]: yes

Building configuration...

Use the enabled mode 'configure' command to modify this

configuration.

Press RETURN to get started!

Configuring the Cisco 2524 and Cisco 2525 Routers 4-13

Configuring the Router