- ページ 4
コントロールユニット ActronAir CP05のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。ActronAir CP05 16 ページ。 Control interface
ページを印刷する
CP05 & CP10 CONTROL INTERFACE INSTALLATION GUIDE
SPECIFICATIONS:
Control Interface (CP10) Technical Specifications:
Display
Type:
Backlighting:
Graphic resolution:
Text mode:
Character height:
Size of active area:
Size of display area:
Keypad LEDs / Buzzer
2 programmable by application software,red and orange ("
4 green LEDs, used as backlighting for LCD ("
Buzzer (optional)
Power supply
Voltage:
Maximum power input:
Maximum cable length (Note: To reach the maximum length, use a bus layout with branches not exceeding 5m)
Maximum pLAN length:
Max. OD Controller terminal distance:
Materials
Transparent front panel, cover glass/frame: Transparent polycarbonate
Charcoal grey container back piece
(wall / built-in):
Keypad:
Self extinguishing classificaion:
Others
Index of protection:
Operating conditions:
Storage conditions:
Software class and structure:
Classification according to protection
against electric shock:
PTI of insulating materials:
Period of elect stress across insul. parts
Category of resistance to fire and heat:
Immunity against voltage surges:
Environmental pollution:
4
Prg
Esc
FSTN graphic
White LEDs (controlled by application software), depending on cod.
132x64 pixel
8 rows x 22 columns (font sizes 5x7 and 11x15 pixels)
4 rows x 11 columns (font size 11x15 pixels)
or mixed modes
3.5mm (font 5x7 pixels)
7.5mm (font 11x15 pixels)
66x32mm
72x36mm
and " " buttons)
Prg"
"
"
and "
",
",
"
Power supply from OD Controller through telephone cable or ext. source
18/30 VDC protected with 2 250 mAT fuse
0.8W
500m with 6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24) Shielded Data Cable
50m with 6 Core Flat 7/0.12 (AWG28) Telephone Cable
500m with 6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24) Shielded Data Cable
Polycarbonate + ABS
Silicon rubber
V0 for transparent front panel and back piece.
HB for silicon keypad and remaining parts
IP65 for panel mounting, IP40 for wall mounting, UL type 1
-20 to 60
o
C, 90% RH non-condensing
-20 to 70
o
C, 90% RH non-condensing
A
To be integrated into class 1 or 2 devices
PCB: PTI 250; insulation material PTI 175
Long period
D
Category II
2
buttons)
Esc"
CP05 - CP10 Control Interface Insert
Doc. No.0525-035 Ver. 6 220307