ネットワーク・ルーター Cisco 2801 - Integrated Services RouterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2801 - Integrated Services Router 29 ページ。 2800 series integrated services routers
Cisco 2801 - Integrated Services Router にも：データシート (20 ページ), クイック・スタート・マニュアル (47 ページ)

ページを印刷する

Cisco 2801 - Integrated Services Router ユーザーマニュアル

Cisco 1841 Integrated Services Router with

AIM-VPN/BPII-Plus and Cisco 2801

Integrated Services Router with

AIM-VPN/EPII-Plus FIPS 140-2 Non

Proprietary Security Policy

Level 2 Validation

Version 1.3

December 14, 2005

Introduction

This document is the non-proprietary Cryptographic Module Security Policy for the Cisco 1841

Integrated Services Routers with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Routers with

AIM-VPN/EPII-Plus. This security policy describes how the Cisco 1841 and Cisco 2801 Integrated

Services Routers (Hardware Version: 1841 or 2801; AIM-VPN/BPII-Plus Version: 1.0, Board Version:

C1; AIM-VPN/EPII-Plus Version: 1.0, Board Version: D0; Firmware Version: 12.3(11)T03) meet the

security requirements of FIPS 140-2, and how to operate the router in a secure FIPS 140-2 mode. This

policy was prepared as part of the Level 2 FIPS 140-2 validation of the Cisco 1841 and Cisco 2801

Integrated Services Routers.

FIPS 140-2 (Federal Information Processing Standards Publication 140-2—Security Requirements for

Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More

information about the FIPS 140-2 standard and validation program is available on the NIST website at

http://csrc.nist.gov/cryptval/.

This document contains the following sections:

•

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Introduction, page 1

Cisco 1841 and Cisco 2801 Routers, page 3

Secure Operation of the Cisco 1841 or Cisco 2801 router, page 21