- ページ 9
ネットワーク・ルーター Cisco 2851 - Integrated Services RouterのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 2851 - Integrated Services Router 25 ページ。 Power up and initial configuration procedures
Cisco 2851 - Integrated Services Router にも： インストールとアップグレード (21 ページ), データシート (20 ページ), クイック・スタート・マニュアル (47 ページ), 構成 (10 ページ)
ページを印刷する
To apply serialized tamper-evidence labels to the Cisco 2851:
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
Step 1
cleaning pads are recommended for this purpose. The temperature of the router should be above 10 C.
The tamper evidence label should be placed so that the one half of labels A, B, C, D and E covers the
Step 2
enclosure and the other half covers the port adapter slot.
The tamper evidence label should be placed so that the one half of label F covers the enclosure and the
Step 3
other half covers the rear panel.
The tamper evidence label should be placed so that one half of labels G and H covers the front panel and
Step 4
the other half covers the enclosure.
The tamper evidence label I should be placed over the CF card in the slot so that any attempt to remove
Step 5
the card will show sign of tampering.
The labels completely cure within five minutes.
Step 6
Figure 4
Figure 4
Figure 5
Cryptographic Key Management
The router securely administers both cryptographic keys and other critical security parameters such as
passwords. The tamper evidence seals provide physical protection for all keys. All keys are also
protected by the password-protection on the Crypto Officer role login, and can be zeroized by the Crypto
Officer. All zeroization consists of overwriting the memory that stored the key. Keys are exchanged and
entered electronically or via Internet Key Exchange (IKE).
The routers support the following FIPS 140-2 approved algorithm implementations:
OL-8717-01
and
Figure 5
show the tamper evidence label placements for the Cisco 2851.
Cisco 2851 Tamper Evident Label Placement (Back View)
Cisco 2851 Tamper Evident Label Placement (Front View)
Cisco 2851 Integrated Services Router FIPS 140-2 Non Proprietary Security Policy
Cisco 2851 Routers
9