- ページ 12
コントロールパネル ActronAir LM7-DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ActronAir LM7-D 16 ページ。 Air conditioner ultima zone control
ページを印刷する
- 1. Operating Instructions
- 2. Master Controller
- 3. Table of Contents
- 4. General Information
- 5. Zone Controller Functions
- 6. Turning Zone Controller on
- 7. ESP Auto Mode
- 8. Zone Damper Blade Indicator
- 9. Fan Only Mode
- 10. Zone Temperature Display
- 11. Zone Open Mode
- 12. Trouble Shooting
- 13. Frequently Asked Questions
Condition
The system does
not start.
Air does not fl ow.
(Indoor Unit)
OFF is displayed on
my zone controller
and I cannot turn the
zone On.
For any assistance with your ESP Ultima System,
do not hesitate to contact our Customer Care Team for
12
TROUBLE SHOOTING
Causes or Check Points
•
Check that 5 minutes has passed from the time you turned
the system on, as the system has in-built safety timers.
•
Check thermostat settings are correct.
•
Check the thermostat "set-point" is set low enough for
cooling or high enough for heating.
•
Check that the Master Controller is set to correct mode for
COOL / AUTO / HEAT.
•
Check if the unit is set in the correct mode
COOL / AUTO / HEAT.
•
Check your Zone Controller is turned on. If using zone sensor,
ensure your zone is turned on at the Master Controller.
•
During defrost cycle of the outdoor unit (in HEAT mode),
the indoor fan will not operate.
Defrost cycle is indicated when "HEAT" is fl ashing on the
Master Controller display.
•
This means the Master Controller is turned off.
First turn on your air conditioner at the Master Controller.
You will now be able to turn on your Zone Controller.
technical support on freecall number:
1800 119 229