- ページ 3

ネットワーク・ルーター Cisco 3600 SeriesのPDF アプリケーションノートをオンラインで閲覧またはダウンロードできます。Cisco 3600 Series 41 ページ。 Memory upgrade
Cisco 3600 Series にも：製品概要 (10 ページ), アップグレード手順 (30 ページ), オーナーズマニュアル (17 ページ), 設定マニュアル (36 ページ), ユーザーマニュアル (25 ページ), 付録 (15 ページ), ユーザーマニュアル (7 ページ), マニュアル (5 ページ), コンフィギュレーション・ノート (23 ページ), コンフィギュレーション・ノート (18 ページ), コンフィギュレーション・ノート (25 ページ)

Features

•

Basic Call (ENBLOC and Overlap)

•

Call Transfer: Supervised Local Transfer

•

Call Transfer: Supervised Network/External Transfer

•

Call Conference: Local

•

Call Conference: Network/External

•

Call Forward: Local

•

Call Forward: Network/External

•

Call Hold

•

MWI

•

On basic calls, Connected Number was supported in lieu of Called (Alerting) Number. This is inherent to the PBXs and also occurs with

the PBXs connected directly via an E1 QSIG trunk.

•

On Supervised Transfers, the original Calling Name and Number were displayed on the final destination phone only after the destination

answered and the transfer was completed. This is inherent to the PBXs and also occurs with the PBXs connected directly via an E1

QSIG trunk.

•

On Supervised Transfers, the Called Name/Number were displayed on the originating phone only after the destination answered and the

transfer was completed. This is inherent to the PBXs and also occurs with the PBXs connected directly via an E1 QSIG trunk.

•

Call Hold was not tested as a separate feature. The call is held automatically during Transfers or Conferences, and the call hold is

facilitated in NOTIFY message from Siemens HiPath/Hicom PBX. Aside from Transfers or Conferences, it is not possible to put a call

on hold from one of the Siemens HiPath/Hicom digital station phones. This is inherent to the PBXs and also occurs with the PBXs

connected directly via an E1 QSIG trunk.

•

MWI was not tested, as a local voice mail system was not available on the PBXs at the time of testing.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 3 of 41