- ページ 6

プロジェクター Epson EMP-TW100のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson EMP-TW100 12 ページ。 Home theatre projector
Epson EMP-TW100 にも：パンフレット＆スペック (24 ページ), ユーザーマニュアル (9 ページ), セットアップマニュアル (10 ページ)

The projector supports the following five projection methods, allowing you to choose the

best method for displaying your images.

After setting up the projector, refer to the User's Guide for details on turning on the power

and adjusting settings such as the screen size. ( "Basic Operations" in User's Guide)

When setting up the projector, be sure to first read the Safety

Instructions/World-Wide Warranty Terms for information on the safety

precautions that must be observed at this time.

Front projection

Front/ceiling projection

* A special method of installation is required in order to suspend the projector from the ceiling. Please

contact the place of purchase if you would like to use this installation method.

* When installing to the ceiling or projecting from behind the screen, set the Screen Mode command in the

Settings environment setting menu to match the method of projection being used.

(

Settings

menu in User's Guide)

Setting-up Methods

Rear projection using a

translucent screen

Rubber stands

(Attach in

3 places)

Projecting from locations such as the

top of a cabinet

When installing the projector upside down, set

the Screen Mode command in the Settings

environment setting menu to "Front/Ceiling".

("Settings" menu in User's Guide)

Rear projection onto a

translucent screen with the

projector installed to the ceiling

When turning the projector upside

down, attach the rubber stands that

are included.

This can prevent the control panel

from directly touching the

installation surface.