- ページ 14

ネットワーク・ルーター Cisco 3745のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3745 48 ページ。 Non-proprietary security policy
Cisco 3745 にも：ソリューションの概要 (16 ページ), アップグレード手順 (30 ページ), クイック・スタート・マニュアル (33 ページ), インストレーション・マニュアル (12 ページ)

ページを印刷する

The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers

The cryptographic boundary is defined as encompassing the "top," "front," "left," "right," and "bottom"

surfaces of the case; all portions of the "backplane" of the case which are not designed to accommodate

a WIC or Network Module; and the inverse of the three-dimensional space within the case that would be

occupied by an installed WIC or Network Module. The cryptographic boundary includes the connection

apparatus between the WIC or Network Module and the motherboard/daughterboard that hosts the WIC

or Network Module, but the boundary does not include the WIC or Network Module itself. In other

words, the cryptographic boundary encompasses all hardware components within the case of the device

except any installed modular WICs or Network Modules. All of the functionality discussed in this

document is provided by components within this cryptographic boundary.

Cisco IOS features such as tunneling, data encryption, and termination of Remote Access WANs via

IPSec, Layer 2 Forwarding (L2F) and Layer 2 Tunneling Protocols (L2TP) make the Cisco 2600 an ideal

platform for building virtual private networks or outsourced dial solutions. Cisco 2600`s RISC-based

processor provides the power needed for the dynamic requirements of the remote branch office,

achieving wire speed Ethernet to Ethernet routing with up to 70 thousand packets per second (Kpps)

throughput capacity.

Cisco 2691 Module Interfaces

The interfaces for the router are located on the rear panel as shown in

Figure 11

NM -H DV

BA NK 4

The Cisco 2691 router features console and auxiliary ports, dual fixed LAN interfaces, a Network

Module slot, two Cisco WAN interface card (WIC) slots, and a Compact Flash slot.

LAN support includes single and dual Ethernet options; 10/100 Mbps auto-sensing Ethernet; mixed

Token-Ring and Ethernet; and single Token Ring chassis versions. WAN interface cards support a variety

of serial, ISDN BRI, and integrated CSU/DSU options for primary and backup WAN connectivity, while

available Network Modules support multi-service voice/data/fax integration, departmental dial

concentration, and high-density serial options. The AIM slot supports integration of advanced services

such as hardware-assisted data compression and encryption. All Cisco 2600 series routers include an

auxiliary port supporting 115Kbps Dial-On-Demand Routing, ideal for back-up WAN connectivity.

When a Network Module is inserted, it fits into an adapter called the Network Module expansion bus.

The expansion bus interacts with the PCI bridge in the same way that the fixed LAN ports do; therefore,

no critical security parameters pass through the Network Module (just as they don't pass through the

LAN ports). Network modules do not perform any cryptographic functions.

Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary

Cisco 2691 Physical Interfaces

BA NK 3

BA NK 2

BA NK 1

BA NK 0

SEE MAN

UAL BEF

ORE INS

TAL LAT ION

DS U

56K

SEE MAN

UAL BEF

ORE INS

DS U

TAL LAT ION

56K

SEE MAN

UAL BEF

ORE INS

TAL LAT ION

Figure

11.

OL-6083-01