- ページ 26

ネットワーク・ルーター Cisco 3745のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3745 48 ページ。 Non-proprietary security policy
Cisco 3745 にも：ソリューションの概要 (16 ページ), アップグレード手順 (30 ページ), クイック・スタート・マニュアル (33 ページ), インストレーション・マニュアル (12 ページ)

ページを印刷する

The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers

Figure 19

Table 16

LED

Enabled

IO POWER OK

Slot 0

Slot 1

Link

100 Mbps

Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary

Cisco 7206 VXR NPE-400 I/O Controller

C7200-I/O-2FE/E

provides detailed information conveyed by the LEDs on the front panel of the I/O Controller.

Cisco 7206 VXR NPE-400 Front Panel LEDs and Descriptions

Indication

Green

Amber

Off

Green

Off

Green

Off

DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER

Description

Indicates that the network processing engine or network

services engine and the I/O controller are enabled for

operation by the system; however, it does not mean that the

Fast Ethernet port on the I/O controller is functional or

enabled. This LED goes on during a successful router boot

and remains on during normal operation of the router.

Indicates that the I/O controller is on and receiving DC power

from the router midplane. This LED comes on during a

successful router boot and remains on during normal

operation of the router.

Powered off or failed.

These LEDs indicate which PC Card slot is in use by coming

on when either slot is being accessed by the system. These

LEDs remain off during normal operation of the router.

Indicates that the Ethernet RJ-45 receptacle has established a

valid link with the network.

This LED remains off during normal operation of the router

unless there is an incoming carrier signal

Indicates that the port is configured for 100-Mbps operation

(speed 100), or if configured for autonegotiation (speed

auto), the port has detected a valid link at 100 Mbps.

If the port is configured for 10-Mbps operation, or if it is

configured for autonegotiation and the port has detected a

valid link at 10 Mbps, the LED remains off.

OL-6083-01