- ページ 7

ネットワーク・ルーター Cisco 3800 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3800 Series 7 ページ。 Password recovery procedure
Cisco 3800 Series にも：データシート (8 ページ), アプリケーションノート (41 ページ), トラブルシューティングマニュアル (15 ページ), データシート (20 ページ), クイック・スタート・マニュアル (40 ページ), 設定 (32 ページ)

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#config−register 0x2102

Router(config)#^Z

00:03:20: %SYS−5−CONFIG_I: Configured from console by console

Router#show version

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600−IS−M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)

Compiled Tue 07−Dec−99 02:21 by phanguye

Image text−base: 0x80008088, data−base: 0x80C524F8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 3 minutes

System returned to ROM by abort at PC 0x802D0B60

System image file is "flash:c2600−is−mz.120−7.T"

cisco 2611 (MPC860) processor (revision 0x202)

with 26624K/6144K bytes of memory.

Processor board ID JAB031202NK (3878188963)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

2 Ethernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)

1 ISDN Basic Rate interface(s)

32K bytes of non−volatile configuration memory.

8192K bytes of processor board System flash partition 1 (Read/Write)

8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0x2142 (will be 0x2102 at next reload)

Router#

Related Information

•

Password Recovery Procedures

•

Cabling Guide for Console and AUX Ports

•

Connecting a Terminal to the Console Port on Catalyst Switches

•

Connect a Terminal to Catalyst 2948G−L3, 4908G−L3, and 4840G Series Switches

•

Standard Break Key Sequence Combinations During Password Recovery

•

Technical Support − Cisco Systems

Contacts & Feedback | Help | Site Map

Cisco Systems, Inc.

Updated: Dec 12, 2006

Document ID: 22189