- ページ 10

バッテリーチャージャー ACDelco I-7005TのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。ACDelco I-7005T 15 ページ。 Fully automatic microprocessor controlled battery charger for 12-volt lead acid batteries

ページを印刷する

• Function Key

Maintenance Cycle Mode - Pressing

■

Function Key once will result in a charge

cycle called a 'Maintenance Cycle'. This

cycle is also referred to as a 'Pulse'

cycle. During this cycle, small impulses of

electrical energy are sent to the battery.

This helps to de-sulfate the battery plates

and 'maintain' a full charge.

This charger will wake up to maintenance

mode automatically when battery

discharges to low level due to cold

weather or long time idleness.

With this mode activated (i.e. keep battery

charger plugged and a charging rate has

been selected, DC clamps connected to

car battery), cranking the engine made

easy in extreme cold weather or coming

back from long outings.

NOTE: 2A rating and 'Maintenance' mode

can be used to charge less than 12Ah

batteries, but takes longer time. Or to

speed up charging, try 6A ﬁrst and then

2A.

Reinforced Activation Mode - Pressing

■

the Function Key twice will trigger the

Reinforced Activation Mode. The charger

system will send a pulse charge cycle to

the battery and the Reinforced Activation

Mode will be enabled automatically for

one hour.

OPERATION

USE OF REINFORCED ACTIVATION

MODE:

Your battery charger contains a Reinforced

Activation Mode. In certain cases, batteries

can become depleted as a result of deposits

that build up on the battery plates. In some

cases, this will cause your battery to resist

normal charging processes. When the normal

charging mode fails or the Maintenance

Mode does not reactivate the battery, the

Reinforced Activation Mode may help remove

the deposits on the battery plates and

thereby permit battery charging. THIS MODE

SHOULD BE USED ONLY WHEN NORMAL

BATTERY CHARGING PROCESSES and

THE MAINTENANCE MODE FAILS as use

of this mode on a battery that would accept

a normal charge may harm your battery.

In addition, this mode will not work on all

depleted batteries.