- ページ 9

ネットワーク・ルーター Cisco NCS 6008のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco NCS 6008 12 ページ。 6000 series network convergence system routers unpacking, moving, and securing guide
Cisco NCS 6008 にも：開梱・移動・固定マニュアル (44 ページ)

ページを印刷する

Bring-up the Cisco NCS 6008 Router

Verify that ten TenGigE interfaces are created for every HundredGigE interface of the slice on which the

breakout is configured.

RP/0/RP0/CPU0:router(config)#show ipv4 interface brief

Interface

Bundle-Ether1

Loopback0

Loopback10

Loopback11

Loopback12

Loopback13

....

MgmtEth0/RP1/CPU0/0

HundredGigE0/0/0/0

HundredGigE0/0/0/1

HundredGigE0/0/0/2

HundredGigE0/0/0/3

HundredGigE0/0/0/4

....

TenGigE0/1/0/0

TenGigE0/1/0/1

TenGigE0/1/0/2

TenGigE0/1/0/3

TenGigE0/1/0/4

....

Shut Down Unused Linecard Slices

The NCS 6000 linecards, namely, NCS 6000 10x100G Multi-Service CPAK, NCS 6000 10x100G Multi-Service

CXP, and NCS 6000 60x10GE PAT, have multi-slice architecture. The 10X100G line cards has 5 slices,

whereas the 60X10G line cards has 4 slices. Each slice can be individually shut down:

• To save power- Shutting down a slice will power down the slice. This will reduce the power consumption

• For troubleshooting - If a slice is malfunctioning, shutting it down isolates the slice from the system,

SUMMARY STEPS

1. configure

2. hw-module location rack/slot/CPU slice slice_number shutdown

3. commit

DETAILED STEPS

Step 1

configure

Step 2

hw-module location rack/slot/CPU slice slice_number shutdown

of that line card. The mode of operating line cards with one or more slices shut is called the green mode.

Note

Shutting down a slice will also delete the Virtual Output Queue (VOQ) and this

drops the ingress-traffic.

thus reducing its impact on the router. Also, troubleshooting can be done within the domain of the slice.

IP-Address

Status

199.1.1.1

100.100.100.100 Up

unassigned

4.15.10.145

unassigned

10.0.4.1

10.1.0.1

10.1.1.1

10.1.2.1

10.1.3.1

10.1.4.1

Bring-up the Cisco NCS 6008 Router

Shut Down Unused Linecard Slices

Protocol Vrf-Name

default