- ページ 19
ネットワーク・ルーター Cisco Nexus 9000 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Nexus 9000 Series 30 ページ。 Switch chassis
Cisco Nexus 9000 Series にも： クイックスタート設定マニュアル (6 ページ), 設定マニュアル (32 ページ), 設定マニュアル (32 ページ), インストレーション・マニュアル (12 ページ), インストール (8 ページ), クイック・スタート・マニュアル (14 ページ), マニュアル (16 ページ)
ページを印刷する
Configuring IP Fabric for Media
This chapter describes how to configure the Cisco Nexus 9200 Series switches for Cisco's IP fabric for media
solution.
•
•
•
•
•
•
Prerequisites
Cisco's IP fabric for media solution has the following prerequisites:
• The Cisco Nexus 9200 Series switches must be running Cisco NX-OS Release 7.0(3)I4(2) or a later
• TCAM carving must be configured on the spine switch and each leaf switch using the hardware
Guidelines and Limitations
Cisco's IP fabric for media solution has the following guidelines and limitations:
• Only the Cisco Nexus 9236C and 9272Q can be spine switches.
• Only the Cisco Nexus 9236C, 9272Q, and 92160YC-X can be leaf switches.
Prerequisites, page 11
Guidelines and Limitations, page 11
Configuring NBM, page 12
Configuring PTP for Media, page 15
Configuration Example, page 18
Related Documentation, page 18
release.
access-list tcam region ing-ifacl 2048 command. The following example shows how you might provision
the TCAM. For more information on TCAM carving, see the
Configuration
Guide.
hardware access-list tcam region ing-l2-qos 0
hardware access-list tcam region ing-l3-vlan-qos 256
hardware access-list tcam region ing-racl 256
hardware access-list tcam region ing-ifacl 2048
Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 7.0(3)I4(2)
4
C H A P T E R
Cisco Nexus 9000 Series NX-OS Security
11