- ページ 11

DCドライブ Actulux HCVAR 500/800のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Actulux HCVAR 500/800 12 ページ。 Chain drive

Function of remote control for HCVAR

Note!

The remote control is operated

at a short press per function.

Long pressures will cause shorter

battery life.

By default, HCVAR comes with a paired remote control (item no.# 111890).

One chain drive remember max. 20 pcs. remote controls.

1) Press and hold the "program button" on the chain drive until the

2) Within 5 seconds - press any button on the remote control and its LED indicator lights up.

3) The LED / Buzzer indicator in the chain drive turns off after one flash / beep = the remote

control and chain drive are now paired.

If you need to remove one remote, you have to delete all of them; by pressing the "Program

button" for more than 3 seconds until the LED / Buzzer indicator has been switched on and off

again. Now all remote controls are deleted and you need to pair all of them again.

It is possible to connect a wind / rain sensor wireless to the chain drive.

(See our user manual for wind and rain sensor at www.actulux.com)

Rain sensor # 111960

Wind- & rain sensor # 111961

To access the "Program button" in the drive,

remove the plastic cap on the top of the housing.

LED / Buzzer indicator lights / beeps.

RELEASE THE BUTTON IMMEDIATELY.

Stop

Program button

HCVA/HCVAR

Open

Red LED