- ページ 5

ネットワーク・ルーター Cisco SLM248PのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco SLM248P 13 ページ。 Smart switch
Cisco SLM248P にも：データシート (5 ページ)

in half- and full- duplex modes. Auto-sensing technology enables each port

to automatically detect the speed of the device connected to it (10 Mbps

or 100 Mbps), and adjust its speed and duplex mode accordingly.

miniGBIC — (1-2) The miniGBIC (gigabit interface converter) port is a

connection point for a miniGBIC expansion module, so the switch can be

uplinked to another switch by using a fiber optical link. The miniGBIC port

provides a link to a high-speed network segment or individual workstation

at speeds of up to 1000 Mbps.

Back Panel

The power port is located on the back panel of the switch.

There are two ways to physically install the switch, either set the switch on

its four rubber feet for desktop placement or mount the switch in a rack.

Before you begin the installation, make sure that you have the following

equipment and services:

• Tools for installing the hardware

• Cables for WAN interfaces, desktop systems, and fiber connectivity

devices, or for connecting additional additional LAN interfaces

• Computer with Microsoft Internet Explorer 6.0 or later, or Mozilla Firefox

version 3 or later for using web-based system management tools

• Make sure that the switch is accessible and that the cables can be

connected easily.

• Keep cabling away from sources of electrical noise, power lines, and

fluorescent lighting fixtures.

• Do not stack free-standing switches more than four units high.

Cisco Small Business SLM Series Smart Switch Installation Guide