ページを印刷する16
5
Maintenance
5.2
Lubricating the blades
i
Note!
When cutting through the label material instead of the label gap
remains of adhesive may accumulate on the blades. If operating in
backfeed mode, such remains of adhesive may be deposited on the
drive roller as well.
Clean often the drive roller ( Printer Instructions) and the
cutter blades.
For a perfect function of the CSQ cutter, it is necessary to grease the blades
and guides at selected areas.
After each cleaning and before installing new blades, grease must be applied.
!
Attention!
Use only a plastic grease to grease the blades and running
surfaces.
cab Part No.: 5984552.001
Grease sliding
surfaces
Grease guide slots
16