- ページ 10
ネットワーク・ルーター Cisco Unified Communications Manager 8.5(1)のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Unified Communications Manager 8.5(1) 20 ページ。 850 series and 870 series access routers cabling and setup
Cisco Unified Communications Manager 8.5(1) にも： データシート (8 ページ)
ページを印刷する
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Connect the Power-over-Ethernet Module to the Cisco 870 Series Router (Optional)
Figure 1-5
Connecting the PoE Module to the Router
SN: XXXNNNNXXXX
LAN
1
LEFT
0
FE0
FE1
FE2
0
1
2
To LAN
3
1
Cisco 870 series router
2
Ethernet cables on the PoE module (four
RJ-45 connectors in series)
3
PoE module
4
PoE power adapter
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
1-10
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
1
Cisco 871W
WAN
CONSOLE
RESET
AUX
FE3
FE4
2
PWR
3
4
RIGHT / PRIMARY
+5,+12 VDC
5
5
Router power adapter
6
PoE power plug
7
Router power plug
7
6
78-16262-04