- ページ 12

ネットワーク・ルーター Cisco vEdge 100のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco vEdge 100 22 ページ。

Install the vEdge 100 Router

1. Grasp both sides of the router, then lift and position it in the rack, making sure that the mounting ear holes

are aligned with the threaded holes in the rack rail.

Figure 3: Positioning the vEdge 100 Router in the Rack

1. Secure the mounting ears to the two front posts of the rack using the four rack-mount screws (two on each

side) in the packet marked B. Tighten the screws.

Figure 4: Attaching the Mounting Ears to the Rack

1. Use a tape measure or level to verify that the tray is installed straight and the holes at either ends of the

rack align properly.

vEdge 100 Router