- ページ 18

ネットワーク・ルーター Cisco WRT54G2 LinksysのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco WRT54G2 Linksys 44 ページ。 Wireless-g
Cisco WRT54G2 Linksys にも：データシート (2 ページ), クイック・インストール・マニュアル (44 ページ), ユーザーマニュアル (8 ページ)

ページを印刷する

Chapter 3

Permit Only

Select this to allow wireless access by MAC

Address. This button is not selected by default.

Edit MAC Filter List

Click this to open the MAC Address

Filter List screen. On this screen, you can list users, by MAC

Address, to whom you wish to provide or block access. For

easy reference, click Wireless Client MAC List to display a list

of network users by MAC Address.

MAC Address Filter List

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wireless > Advanced Wireless Settings

This Wireless > Advanced Wireless Settings screen is used

to set up the Router's advanced wireless functions. These

settings should only be adjusted by an expert administrator

as incorrect settings can reduce wireless performance.

Wireless > Advanced Wireless Settings

Wireless-G Broadband Router

Advanced Configuration

Advanced Wireless

Authentication Type

The default is set to Auto, which

allows either Open System or Shared Key authentication

to be used. With Open System authentication, the sender

and the recipient do NOT use a WEP key for authentication.

With Shared Key authentication, the sender and recipient

use a WEP key for authentication.

Basic Rate

The Basic Rate setting is not actually one rate

of transmission but a series of rates at which the Router

can transmit. The Router will advertise its Basic Rate to the

other wireless devices in your network, so they know which

rates will be used. The Router will also advertise that it will

automatically select the best rate for transmission. The

default setting is Default, when the Router can transmit

at all standard wireless rates (1-2Mbps, 5.5Mbps, 11Mbps,

18Mbps, and 24Mbps). Other options are 1-2Mbps, for

use with older wireless technology, and All, when the

Router can transmit at all wireless rates. The Basic Rate

is not the actual rate of data transmission. If you want to

specify the Router's rate of data transmission, configure

the Transmission Rate setting.

Transmission Rate

The rate of data transmission should

be set depending on the speed of your wireless network.

You can select from a range of transmission speeds, or you

can select Auto to have the Router automatically use the

fastest possible data rate and enable the Auto-Fallback

feature. Auto-Fallback will negotiate the best possible

connection speed between the Router and a wireless

client. The default value is Auto.

CTS Protection Mode

CTS (Clear-To-Send) Protection

Mode should remain disabled unless you are having severe

problems with your Wireless-G products not being able

to transmit to the Router in an environment with heavy

802.11b traffic. This function boosts the Router's ability

to catch all Wireless-G transmissions but will severely

decrease performance.

Frame Burst

Enabling this option should provide your

network with greater performance, depending on the

manufacturer of your wireless products. To turn on the

Frame Burst option, select Enable. The default is Disable.

Beacon Interval

The default value is 100. Enter a value

between 1 and 65,535 milliseconds. The Beacon Interval

value indicates the frequency interval of the beacon. A

beacon is a packet broadcast by the Router to synchronize

the wireless network.

DTIM Interval

This value, between 1 and 255, indicates

the interval of the Delivery Traffic Indication Message

(DTIM). A DTIM field is a countdown field informing

clients of the next window for listening to broadcast

and multicast messages. When the Router has buffered

broadcast or multicast messages for associated clients, it

sends the next DTIM with a DTIM Interval value. Its clients