- ページ 9

ネットワーク・ルーター Cisco WUMC710のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco WUMC710 17 ページ。 802.11ac
Cisco WUMC710 にも：ユーザーマニュアル (17 ページ), クイック・インストール・マニュアル (17 ページ)

ページを印刷する

1. Setup > Basic Setup

Linksys WUMC710

Wireless Security

The bridge supports the following wireless security options: WPA Personal,

WPA2 Personal, and WEP WPA (Wi-Fi Protected Access) and WPA2 are stronger

security methods than WEP (Wired Equivalent Privacy) For more information

about wireless security, refer to "Wireless Security Checklist" on page 4

Security Mode

Select the security method for your wireless network If you do not want to use

wireless security, keep the default, Disabled

NOTE

Remember that each device in your wireless network MUST use

the same security method and passphrase/key, or else the wireless

devices will not be able to communicate with each other

WPA Personal

WPA is a security standard stronger than WEP encryption

Encryption

WPA supports the TKIP encryption method, with dynamic

encryption keys

Passphrase

Enter the key shared by the bridge and your wireless router or

access point It must have 8-63 characters

Click Save Settings to apply your changes, or click Cancel Changes to cancel

your changes

WPA2 Personal

WPA2 is a more advanced, more secure version of WPA

Encryption

WPA2 supports two encryption methods, TKIP and AES, with

dynamic encryption keys Select the encryption method, AES or TKIP or AES

The default selection is AES

Passphrase

Enter the key shared by the bridge and wireless router or access

point It must have 8-63 characters

Click Save Settings to apply your changes, or click Cancel Changes to cancel

your changes

WEP

WEP is a basic encryption method, which is not as secure as WPA or WPA2

Encryption

Select a level of WEP encryption, 40/64 bits (10 hex digits) or

104/128 bits (26 hex digits) The default is 40/64 bits (10 hex digits)

Advanced Configuration