- ページ 4
プロジェクター Epson V11H128020 - PowerLite S1 SVGA LCD ProjectorのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson V11H128020 - PowerLite S1 SVGA LCD Projector 7 ページ。 Epson powerlite elpmbuni: installation guide
Epson V11H128020 - PowerLite S1 SVGA LCD Projector にも： 仕様 (2 ページ), 製品情報マニュアル (15 ページ), インストレーション・マニュアル (19 ページ)
ページを印刷する
4
Plug in and turn on
1
Remove the lens cover.
2
Connect the power cord to the projector and plug
the other end into an electrical outlet.
The
3
If you are connecting a device other than a computer,
turn on your equipment. (If you are connecting to
a computer, don't turn it on yet.)
4
Press the
You hear a beep, the
projector lamp comes on in about 6 seconds.
Power button
5
If you are using a computer, turn it on now.
6
Start your video or presentation.
If you have connected more than
one video source, press the
Computer or S-Video/Video button
on the projector remote control to select
the one you want to watch.
NOTE
If you connected a notebook computer and
no image is being projected, you may need to
set up the notebook to output signals externally.
See the Troubleshooting section for instructions.
Turning off the projector
1
When you're finished using the projector, first turn off the
video source.
2
Press the
3
When you see the confirmation message, press the
button again. The
cools down.
4
When the
Caution:
Never unplug the projector when the
flashing orange.
power light turns orange.
Power button on the projector or remote control.
Power button on the projector or remote control.
power light flashes orange as the projector
power light is a steady orange, unplug the projector.
power light flashes green, and the
Source buttons
Power
power light is green or