- ページ 8

無線アクセスポイント Cisco 1700 seriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1700 series 15 ページ。 Secure firewall management center
Cisco 1700 series にも：規制遵守と安全情報マニュアル (45 ページ), 設定マニュアル (25 ページ), アプリケーションノート (41 ページ), ハードウェアのトラブルシューティング (12 ページ), 概要マニュアル (13 ページ), 設定 (34 ページ), マニュアル (5 ページ), クイック・スタート・マニュアル (6 ページ), ハードウェア・インストール・マニュアル (46 ページ)

Configuration Register

Step 3

Configuration Register

Cisco 1700 Series Router Software Configuration Guide

B-8

The -r variable is optional. Entering this variable downloads and boots

Note

the new software but does not save the software to Flash. You can then

use the image that is in Flash the next time you enter the reload

command in the Cisco IOS software CLI.

You will see output similar to the following:

IP_ADDRESS: 10.0.0.1

IP_SUBNET_MASK: 255.255.0.0

DEFAULT_GATEWAY: 1.3.0.1

TFTP_SERVER: 223.255.254.254

TFTP_FILE: c1700-bnr2sy-mz.070298

Invoke this command for disaster recovery only.

WARNING: all existing data in all partitions on flash will be lost!

Do you wish to continue? y/n:

If you are sure that you want to continue, enter y in response to the question in the

output:

Do you wish to continue? y/n:

The router will begin to download the new file.

Pressing Ctrl-C or Break stops the transfer before the Flash memory is erased.

The virtual configuration register is in NVRAM and has the same functionality as

other Cisco routers. You can view or modify the virtual configuration register

from either the ROM monitor or the operating system software.

To change the virtual configuration register from the ROM monitor, enter confreg

by itself for menu mode, or enter the new value of the register in hexadecimal. For

example:

confreg [ hexnum ]

Appendix B

[n]:

[n]:y

ROM Monitor

78-5407-03