- ページ 10
スピーカー CABASSE Baltic 4 FloorstanderのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。CABASSE Baltic 4 Floorstander 17 ページ。 Three way satellite speaker
ページを印刷する
e n g l i s h
With Baltic 4, Cabasse offers a Hi Fi / audio video system with the Cabasse SCS technology
(Spatially Coherent System). Baltic 4 belongs to the high end ARTIS range, with a specific
3-way tri-axial driver, the TCA. With these 3-way speakers combined with a Cabasse active
subwoofer, you get a very high quality system, either in 2.1 configuration (standard stereo) or
in 5.1 configuration (5 channels system) or 6.1 or 7.1...
Depending on your system - stereo or multi-channel - the size of the listening room,
your taste and demand, your Artis dealer will guide you in selecting your Cabasse subwoofer(s):
Santorin 30-200 or Santorin 30-500 and Santorin 38.
UNPACKING
After opening the top carton flaps, fold the carton flaps right
back, remove the cardboard sheet, the bag of accessories and
follow the process ilustrated on page 2. We suggest you to
retain the packing for future use.
INSTALLATION
The components of your system:
2, 3, 5, 6 or 7 Baltic 4
1 Cabasse active subwoofer
Baltic 4 On Wall version
The wall bracket of Baltic 4 On Wall has been designed to
allow a convenient positioning of the TCA driver in many direc-
tions, +/- 39° in any direction
2
the instructions as shown in
Baltic 4 On Base version
Baltic 4 On Base is delivered with a little cradle to set it on a
bookshelf.
Floor standing Baltic 4
The stand version is supplied with adjustable spikes for a per-
fect stability even if the floor is not horizontal.
Positioning of Baltic 4
Positioning of the speakers: if possible, try to match with
3
drawing
, with the Cabasse subwoofer in the front area fa-
cing the listening spot. Its position against a wall reinforces the
extreme low register and limits the reflections between 80 and
200 Hz. However to obtain the best result, it is always neces-
sary to carry out tests according to the acoustics of the room.
CONNECTIONS
It is imperative to respect the correct phasing when connecting :
+ to + (red) and - to - (black).
1
. Please follow step by step
.
Configuration 2.1
4
2 Baltic 4 + 1 Cabasse subwoofer
Connect with speaker cables the amplifier outputs to the ter-
minals HIGH LEVEL INPUT L (left) and HIGH LEVEL INPUT R
(right) of the Cabasse subwoofer and connect the outputs
HIGH LEVEL OUTPUT L (left) and HIGH LEVEL OUTPUT R
(right) of the Cabasse subwoofer to the Baltic 4 inputs
Configuration 5.1
6
5 Baltic 4 + 1 Cabasse subwoofer or
2 main speakers + 3 Baltic 4 + 1 Cabasse subwoofer.
When the processor of your audio video amplifier includes a
2.1 set-up (subwoofer for stereo reproduction), connect each
speaker output of the 5.1 amplifier directly to the matching
Baltic 4 (front right, front left, centre, surround...). Connect
the subwoofer CINCH RCA output of the amplifier to one of
the CINCH RCA LINE IN terminals of the Cabasse subwoofer
7
.
Then adjust the set-up menu of your audio video amplifier:
5 Baltic 4 + 1 Cabasse subwoofer
FRONT
CENTER
SURROUND
SUBWOOFER / LFE
2 main speakers + 3 Baltic 4
+ 1 Cabasse subwoofer
FRONT
CENTER
SURROUND
SUBWOOFER / LFE
*Adjustment in SMALL or LARGE, according to their ability in
reproducing deep low frequencies.
Some audio video amplifiers require these information:
SUBWOOFER
SUBWOOFER stereo
If your audio video has an adjustable crossover frequency, the
adjustment will be 80 Hz.
5
.
SMALL
SMALL
SMALL
YES
SMALL ou LARGE*
SMALL
SMALL
YES
ONLY
YES