- ページ 29
プロジェクター Epson V11H180020-N - PowerLite Home 20のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson V11H180020-N - PowerLite Home 20 50 ページ。 Epson esc/vp21 modem: users guide
Epson V11H180020-N - PowerLite Home 20 にも： クイック・セットアップ・マニュアル (7 ページ), ユーザーマニュアル (1 ページ)
ページを印刷する
Resetting the Lamp Timer
1. Press the
button on the projector or remote control.
Menu
2. Select the
Reset
3. When you see a prompt asking whether you want to execute the command, highlight
and press the
Enter
4. When you're finished, press
The lamp usage timer displays 0H (zero hours) until you've used the lamp for at least 10
hours.
Storing the Projector
If you need to store the projector for a while, do the following:
Make sure the temperature and humidity of the storage area are within the recommended
range for the projector (14 to 140 °F [–10 to 60 °C] and 10 to 90% relative humidity).
Attach the lens cover and retract the feet.
Remove the batteries from the remote control.
Package the projector in its original packaging or equivalent (as described in the following
section).
Transporting the Projector
Note: Epson shall not be liable for any damages incurred during transportation.
The projector contains many glass and precision parts. If you need to transport it, follow these
guidelines to prevent damage:
When shipping the projector for repairs, use the original packaging material if possible. If
you do not have the original packaging, use equivalent materials, placing plenty of
cushioning around the projector. Be sure the carrier is capable of transporting fragile
equipment and is aware that the projector is fragile.
When you are hand-carrying the projector, grasp it by its left and right sides, using the
recessed hand grips underneath.
menu, and then select
button.
or
Esc
Menu
.
Lamp-Hours Reset
.
Yes
Caring for the Projector
29