- ページ 20
無線アクセスポイント Cisco 1800 SeriesのPDF 設定をオンラインで閲覧またはダウンロードできます。Cisco 1800 Series 32 ページ。 Cisco ios software configuration
Cisco 1800 Series にも： クイック・スタート・マニュアル (28 ページ), データシート (16 ページ)
ページを印刷する
How to Configure Radio Settings on an Access Point
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface dot11Radio interface
Example:
Router(config)# interface dot11Radio 0/3/0
Step 4
payload-encapsulation {rfc1042 | dot1h}
Example:
Router(config-if)# no dot11 extension aironet
Step 5
end
Example:
Router(config-if)# end
Step 6
copy running-config startup-config
Example:
Router# copy running-config startup-config
20
enable
configure terminal
interface dot11Radio interface
payload-encapsulation {rfc1042 | dot1h}
end
copy running-config startup-config
Configuring Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
•
Enter your password if prompted.
Enters global configuration mode.
Enters radio interface configuration mode.
•
The interface argument is in module/slot/port format,
except for the Cisco 800 series and Cisco 1800 series
fixed-configuration routers, where the interface
argument is either 0 or 1.
The 2.4-GHz radio is port 0, and the 5-GHz radio is
•
port 1.
Specifies the encapsulation transformation method to RFC
1042 (SNAP) or dot1h (IEEE 802.1h).
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.