- ページ 2
プロジェクター Epson V11H181020SC - MovieMate 25 WVGA LCD ProjectorのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson V11H181020SC - MovieMate 25 WVGA LCD Projector 6 ページ。 Product support bulletin(s)
Epson V11H181020SC - MovieMate 25 WVGA LCD Projector にも： 補足マニュアル (1 ページ), 製品サポート速報 (4 ページ)
ページを印刷する
2
Choose a location
You can use your MovieMate just about anywhere—in the living room, bedroom,
or even outside. You can use it with the subwoofer and screen, or simply project
on a wall and use the built-in audio system without the subwoofer.
The following pictures show three different setups.
If you want an image that fills the screen, place MovieMate about
6
feet away from it. The following diagram shows the approximate
1
⁄
2
image size (measured diagonally) at various distances.
MovieMate doesn't have to be directly in front of the screen, but it has to
face straight ahead (at a 90-degree angle to the screen).
If the image is too low, too high, or off to the side, you can use the lens
shift dials to adjust the position. See section 5 on the back of this sheet.
Make sure you have a grounded electrical outlet, power strip, or extension
cord with two sockets available: one for MovieMate and one for the
subwoofer.
For the best sound, make sure the subwoofer faces toward you and away
from the screen.