- ページ 8

無線アクセスポイント Cisco 2800 SeriesのPDF 概要をオンラインで閲覧またはダウンロードできます。Cisco 2800 Series 27 ページ。 Cisco ios software configuration
Cisco 2800 Series にも: クイック・スタート・マニュアル (13 ページ), データシート (8 ページ), クイック・スタート・マニュアル (47 ページ), アプリケーションノート (41 ページ), クイック・スタート・マニュアル (45 ページ), 構成 (10 ページ), データシート (5 ページ), データシート (20 ページ), 設定 (32 ページ)

Cisco 2800 Series 概要
Hardware Features
To see descriptions of LEDs in removable modules and interface cards, refer to the applicable
documentation for those products: the
Interface Cards Installation
For LED troubleshooting information, including possible trouble causes and corrective actions, see
Table 1
Table 5
LED
SYS PWR
SYS ACT
CF
AUX/PWR
FE 0 Link
FE 0 100
FE 0 FDX
FE 1 Link
FE 1 100
FE 1 FDX
AIM 0
AIM 1
PVDM 0
PVDM 1
Overview of Cisco 2800 Series Routers
8
Guide.
in the
"Troubleshooting Cisco 2800 Series Routers"
Summary of Cisco 2801 Series LED Indicators
Color
Green
Router has successfully booted up and the
software is functional. This LED blinks while
booting or in the ROM monitor.
Green
Blinking when any packets are transmitted or received
on any WAN or LAN or system is monitoring internal
activities.
Green
On when flash memory is busy. Do not
remove the CompactFlash memory card when this
light is on.
Green/
Indicates that the inline power supply is present
Amber
(LED is on). When the inline power supply is not
installed, the LED is off. If the power supply is
working properly, the LED is green. If the
power supply is not working properly, the LED
is amber, indicating an inline power failure.
Green
On when the router is correctly connected to a
local Ethernet LAN through Ethernet port 0.
Green
On indicates a 100-Mbps link.
Off indicates a 10-Mbps link.
Green
On indicates full-duplex operation.
Off indicates half-duplex operation.
Green
On when the router is correctly connected to a
local Ethernet LAN through Ethernet port 1.
Green
On indicates a 100-Mbps link.
Off indicates a 10-Mbps link.
Green
On indicates full-duplex operation.
Off indicates half-duplex operation.
Green
On indicates presence of an advanced integration
module (AIM) in AIM slot 0.
Green
On indicates presence of an AIM in AIM slot 1.
Green
On indicates presence of a packet voice data
module (PVDM) in PVDM slot 0.
Green
On indicates presence of a PVDM in PVDM slot 1.
Cisco Network Modules Hardware Installation Guide
document.
Description
or the
Cisco
Location
Front
Front
Front
Front
Front
Front
Front
Front
Front
Front
Front
Front
Front
Front
OL-5783-01