- ページ 5

無線アクセスポイント Cisco 700 seriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 700 series 9 ページ。 Using profiles
Cisco 700 series にも：クイック・スタート・マニュアル (8 ページ), 概要 (19 ページ), スタートマニュアル (27 ページ), 管理マニュアル (36 ページ)

Creating and Modifying Proﬁles

A new proﬁle is created with the set user command. When you create a new proﬁle, you

automatically enter proﬁle mode for that proﬁle. The following example creates a user

proﬁle called tomd. Enter the set user command to create a proﬁle using the proﬁle

template for the default values of the parameters, as follows:

Host> set user tomd

Host:tomd>

Notice that the proﬁle mode is indicated by the prompt, which appears as the system name

and the proﬁle name, separated by a colon. While this prompt is displayed, modiﬁcations

to the parameters only affect the parameters in the proﬁle. The changes do not affect system

mode parameters or other proﬁles.

The cd command is used to change to system mode or to another proﬁle. Following is an

example of the cd command used to change to a permanent proﬁle called LAN:

Router_name> cd LAN

Router_name:LAN>

Note that the prompt includes the name of the proﬁle. You can now modify the LAN proﬁle

parameters.

Displaying Proﬁle Conﬁgurations

The show commands display the values associated with a proﬁle parameter in proﬁle mode.

The commands work in system mode to show the values associated with parameters in the

proﬁle template.

In proﬁle mode, some show commands only display proﬁle parameters. Parameter values

that have been redeﬁned in proﬁle mode are indicated with a <*>. All other parameter

values are inherited from the proﬁle template.

Removing Proﬁle-Based Values

You can remove any parameter value within a proﬁle with the unset command. The

parameter you removed inherits its value from the system mode.

Creating and Modifying Profiles

Using Profiles with Cisco 700 Series Routers 2-5